|
|
|
|
|
|
|
|
 |
|
|
The GET Smart Wireless Lighting System operates by sending coded wireless signals from controllers to wired-in circuit receiver units. These receiver units in turn control any light fittings that are connected to them. The stylish battery operated controllers can be located in any position around the home, and are available either as a Wall Controller that can be mounted as a flush switch in the existing 16mm deep wall box or as a surface switch in the supplied surface pattress box or as a remote portable unit. Each controller will enable you to set up to four scenes and then select them at the push of a button.
Two different types of receiver units are used in the Wireless system. Firstly, a Floor Receiver that is connected in-line to free standing lamps, uplighters or table lamps. The second option, is a Ceiling Receiver that is wired into the circuit of the lights you are including within the lighting scene, each reciever being able to control up to 350 watts of light. Ceiling lights, wall lights, picture lights all can be controlled set and dimmed from your Wireless Lighting Controller (the more ceiling recievers you use the more moods you can create).Should you need any further information do not hesitate to call our sales department on 01829 730332 or our technical support section on 07765 885666 or visit the GET website on www.getplc.com for an online demonstration and instructions.
VIEW ALL OUR WIRELESS PRODUCTS |
|
|
|
|
|
|
|
